IDEAL FOR SOFT WOOD, PARTICLE BOARD AND MDF
Hex Drives are an inexpensive insert for use in ready-to-assemble furniture, drawer pulls, or wherever the avoidance of thread stripping is desired. Tapered external threads resist pull out caused by vibration. Available in both flush and flanged designs.
 
DIE CAST ZINC ALLOY HEXDRIVE THREAD INSERTS FOR WOOD
E-Z LOK
Part No.		 Internal
Thread 		Length
(mm)		 Length
(in)		 Hole Size (mm) Hole Size (in) Hex Drive Tool
Catalog No.
FLUSH–UNC
800832-10 8-32 10 .394 6 15/64 M4 8500
801024-13 10-24 13 .512 7 9/32 M5 8600
801032-13 10-32 13 .512 7 9/32 M5 8600
801420-13 1/4-20 13 5.12 9 23/64 M6 9000
801420-20 1/4-20 20 .787 9 23/64 M6 9000
851618-20 5/16-18 20 .787 11 7/16 M8 9100
851618-25 5/16-18 25 .984 11 7/16 M8 9100
FLUSH–METRIC
800610-13 M6-1.0 13 .512 9 23/64 M6 9000
800610-20 M6-1.0 20 .787 9 23/64 M6 9000
808125-13 M8-1.25 13 .512 11 7/16 M8 9100
808125-20 M8-1.25 20 .787 11 7/16 M8 9100
FLANGED–UNC
900832-10 8-32 10 .394 6 15/64 M4 8500
901024-10 10-24 10 .394 7 9/32 M5 8600
901024-20 10-24 20 .787 7 9/32 M5 8600
901032-10 10-32 10 .394 7 9/32 M5 8600
901032-13 10-32 13 .512 7 9/32 M5 8600
901032-20 10-32 20 .787 7 9/32 M5 8600
901420-13 1/4-20 13 .512 9 23/64 M6 9000
901420-20 1/4-21 20 .787 9 23/64 M6 9000
901420-25 1/4-22 25 .984 9 23/64 M6 9000
951618-13 5/16-18 13 .512 11 7/16 M8 9100
951618-25 5/16-18 25 .984 11 7/16 M8 9100
903816-13 3/8-16 13 .512 12 31/64 M10 9200
903816-25 3/8-16 25 .984 12 31/64 M10 9200
FLANGED–METRIC
900610-13 M6-1.0 13 .512 9 23/64 M6 9000
900610-20 M6-1.0 20 .787 9 23/64 M6 9000
908125-13 M8-1.25 13 .512 11 7/16 M8 9100
908125-20 M8-1.25 20 .787 11 7/16 M8 9100
Hole size requirements may vary depending on a number of factors, including material and tools. We recommend that you test your particular application before ordering. We gladly supply free samples.
Dimensional Drawing Flush
Dimensional Drawing Flanged
Mechanical Properties
800.234.5613
240 E. Rosecrans Ave, Gardena, CA 90248
v–310.323.5613 f–310.353.4444